I hope you enjoyed the patterns and tutorials of some of my favorite fiber artists. Since I've been promising my own tutorial, I didn't want to disappoint. Having an order for one of my crazy quilt pears made it easier. I made a simple pear which is currently available in my Etsy shop.
Lets get started.
Step one is to find fabrics that you like. You can do a single print, or as I have here, 5 different fabric prints. My crazy quilt version has over 15 batik colors and patterns! Its up to you. This is where you bring your creative signature to life!
Here are the tools and materials you will need:
Fabrics, pins, polyester fiberfill, scissors, sewing machine, needle and thread, stem materials. I used a raffia covered wire. I have also used a natural bark covered wire. If you can't find these, use a soft, bendable wire and cover it with paper and glue. I found my wire at the local garden store in their craft section.
You will also need emery or a material to weigh down your pear. You can also use crushed walnut shells or you can use gravel or sand. You only need about 3-4 Tablespoons.
If you plan on embellishing your pear, you will need embroidery floss and a crewel needle.
Here are the materials I will be using to create a crazy quilt pear. To make one like it, just piece many fabrics together and then cut out your pattern pieces. You will also need perle cotton embroidery thread and assorted laces and embellishments along with about 20 hours of embroidery stitching to bring it to life.
I think it's so worth it in the end...
Note: I am sad to say that the above pear is no longer available for special order. Its just too hard to stitch. If you have ever tried embroidery through a few layers of batik cotton you will understand. It takes a pliers! I have developed a replacement for this pear which I like quite a bit. It takes a bit to make but can be ordered with delivery in 3-4 weeks.
1.Lets choose your fabrics! I choose 5 flower print fabrics. I love their soft vintage feel. Don't forget to choose a fabric for your leaf.
Take your main pattern piece, (watch for my pdf pattern file tomorrow). From your 5 chosen fabrics, cut one piece from each print. Cut 2 pieces from your leaf fabric. This image is from my "How to Draft your Own Pattern Tutorial". I basically turned that pattern upside down to create my pear.
I like to play with the order of my fabrics until I find a pleasing combination. Using a water soluble marker, number your pattern pieces 1 through 5.
Then, with the same marker, I make a little dot at the tip of each pattern piece. it should be 1/4" of an inch down from the tip, right in the center. This is where all of your seams will meet. Do not sew past that dot.
The next step is to sew your pattern pieces together in order from 1-5.
Lay them out, right sides together and add a pin or two. When lining up you pattern pieces to sew, match the dots on both ends. Insert the sewing machine needle right into that mark to begin sewing. This allows you to have beautiful seams on the top and bottom of your apple or pear or any round patchwork. You cannot chain stitch this pattern.
I think it is helpful to press your seams open as you sew. You will want to add stay-stitching to the 2 outside edges before sewing the pear closed. This becomes very helpful when you close your final seams later.
Once you have your stay stitching sewn, sew the last seam. Leave a 2-3 inch opening for turning. The opening should be in the lower middle half of the seam, not on one of the ends. This makes it easier to close your opening neatly.
Reach in and "pop" the two ends of your patchwork. If you don't know what that means, its a technique often used in Dresden piecing. Before turning right side out, take the seams at the end of your pear and give them a bit of a twist. Then flatten the seams so they fan out and lay flat nicely. I don't have an image for this just yet. If you have ever watched Fons and Porter on PBS, they get really excited demonstrating how to "pop" a converging seam. If you don't get it, don't worry.
Turn your pear right sides out.
You will need to create a muslin pocket with emery or another weighted materials such as crushed walnut shells or even sand. I just joined two round pieces together, filled them with emery and closed the seam. I pinched the top of the circle together and stitched it together so the bottom of the pocket is nice and round and full.
For more information on emery, go to my post, "Magical Emery".
Insert your emery pocket into the bottom of the pear.
Using little wads of polyester fiberfill, begin filling your pear. Be sure to pack it tightly, especially in the top section and around the emery pocket. Once you think you have enough in there, add more. Examine your pear from every angle and fill any indentations. I use a stylus stick or the eraser end of a pencil to poke it into every little space. This gives your pear a beautiful shape and makes it very useful as a pincushion.
Close the opening up by hand. If you would like to know how to close your stuffed items with a nearly invisible seam, go to my tutorial on The Classic pincushion. Here is a quick look at how I baste the edges down first. I then take tiny stitches from one side to the next to close the seam.
At this point, I added embroidery stitches along each seam. Embroidery is kind of "my thing". Its my special touch and it identifies me among other artists doing the ssme thing. I totally recommend that you get a "thing". It will make you proud.
Back to the the final stages.
Create a leaf for your pear. I have a few versions but I put them together the same way.
Cut out your pattern. If you choose to embroider veins on your leaf, now is the time to add your stitches. Pin the pieces together. Sew around both ends but leave a 1 inch opening on one of the sides. I use a pinking shears to trim the outer selvages or you can clip the corners.
Turn right side out and stuff.
Close up the opening.
Next add the stem. Sorry I forgot to take a photo of this. Its simple. Clip the very end off of the skinniest part of the leaf. Insert the wire. In pushing the wire in, the end of the fabric will turn under. If not, use a tweezer to coax the raw edge under. Sew the fabric tightly closed around the stem.
Here are two different leaves with the stem inserted.
Take a longer piece of covered wire. This will be the main stem. Join both stems together. I find it helpful to use floral tape to join them. I also find it helpful to take a bit of white glue to the raffia at each end. Let it dry so the ends of the wire are stiff and easy to poke into the pear later.
You will need to create an opening in the pear to accept your stems. I use a large yarn needle. If the top of your pear is completely closed, you may need to use a stitch ripper to loose the top stitches. Then take a pen or pencil and dig it deep into the hole you've created. You need to make way for the stem.
Now carefully insert your stems into the top of the pear.
Once in, arrange the leaf so it droops down. Give the longer stem a bit of a funky twist. You can also cut it shorter if you prefer.
You are done!
After looking at other pear tutorials, I realize how I tend to complicate my pieces with all kinds of special features and new techniques. I really don't apologize for that. In fact, I like putting something extra into the things I do.
My husband often checks the kitchen cabinet for the box of "love" I add to my dishes. He says I cook like no other. Not that I'm an expert at cooking or sewing. I just really care deeply about creating good, beautiful, sturdy, useful things.
I hope that my legacy is that I put a lot of me into this world and that the mark I left is a good one.
Have fun and be wonderful in your mark making!